Solicitar presupuesto

MR-AUS20-RD02SE-RF03 Counter-UAV System

MR-AUS20-RD02SE-RF03 Counter-UAV System
MR-AUS20-RD02SE-RF03 Counter-UAV System
Sistema antidrones integrado

Specification for MR-AUS20-RD02SE-RF03 Counter-UAV System

Descripción del producto:

The MR-AUS20-RD02SE-RF03 Counter-UAV System integrates spectrum detection, protocol analysis, radar detection, electro-optical tracking, directional interference response, and a low-altitude target prevention, control and identification platform. The system uses spectrum detection, protocol analysis and radar detection for target verification, then guides the electro-optical system for detection, tracking and identification. After the target type is confirmed, the system can link the radio interference subsystem to interrupt UAV signals and support authorized low-altitude UAV management.

Obtener presupuesto gratuito

Presentación del producto

The MR-AUS20-RD02SE-RF03 is a lightweight side-mounted Counter-UAV system designed for low-altitude security protection.

It combines spectrum detection, drone ID / remote ID protocol analysis, Ku-band radar detection, visible-light tracking, infrared thermal imaging, AI target recognition, directional interference response, and RGS2000 platform management.

This configuration is suitable for projects requiring compact structure, flexible deployment, coordinated target verification, optical tracking, and centralized platform operation.

Escenarios de aplicación

  • Airport Low-Altitude Security

    Airport Low-Altitude Security

  • Conference Center Security

    Conference Center Security

  • Office Building Perimeter Protection

    Conference Center Securit

  • Restricted Facility Protection

Características del Producto y Especificaciones Técnicas

Highly Integrated System Architecture
The system integrates multiple functional modules while supporting both independent operation and coordinated linkage.

Spectrum Detection and Protocol Analysis
Supports UAV signal detection and protocol analysis, including drone ID and remote ID detection and analysis.

Radar Detection Capability
The radar subsystem adopts digital beam forming technology and supports target detection, tracking and track output.

Electro-Optical Tracking
The electro-optical subsystem combines visible-light imaging, infrared thermal imaging, AI recognition and servo pan-tilt tracking.

Directional Interference Response
The servo system drives directional interference response to improve response distance and speed.

Modular Structure
Subsystems can be independently disassembled, installed and flexibly configured according to project requirements.

Platform-Based Management
The RGS2000 platform supports centralized control, data fusion display, recording and playback, electronic maps, multi-screen display and unattended operation.

Parámetros Técnicos

Parámetro Especificación Parámetro Especificación
Model & Working Range
Nombre del Modelo MR-AUS20-RD02SE-RF03 Counter-UAV System Typical Target DJI Phantom 4
Spectrum Detection Range ≥3 km Radar Detection Range ≥1.5 km
Visible-Light Tracking Range ≥2 km Thermal Imaging Tracking Range ≥1 km
Interference Range ≥1.5 km
Spectrum Detection
Monitoring & Identification Frequency Range 300 MHz ~ 6000 MHz Target Protocol Supports drone ID and remote ID detection and analysis
Simultaneous Detection Capacity ≥30 UAVs
Radar Detection
Banda de radar Banda Ku Frecuencia de actualización 2 s
Target Capacity ≥200 tracks Close-Range Blind Zone ≤100 m
Cobertura acimutal 0° ~ 360° Cobertura de elevación 0° ~ 40°
Detection Altitude ≥500 m Accuracy RMS Azimuth ≤0.5°, Elevation ≤0.5°, Range ≤10 m
Directional Interference Response
Interference Bands 915 MHz / 1.2 GHz / 1.5 GHz / 2.4 GHz / 5.2 GHz / 5.8 GHz Power Amplifier ≥50 W for 2.4 GHz and 5.8 GHz; ≥30 W for other bands
Maximum Simultaneous Interference Channels ≥6 channels Interference Mode Directional interference
Alimentación ≤800 W
Infrared Thermal Imaging
Detector Uncooled VOx infrared focal plane array Resolución 640 × 512
Lente 25 ~ 100 mm, 4× continuous optical zoom Control de lente Motorized zoom, manual / automatic focus
Cámara de Luz Visible HD
Sensor Starlight CMOS, ICR day/night switching Resolución 1920 × 1080
Distancia focal 25 ~ 500 mm HD motorized zoom lens Desempañar Supports optical / electronic dual defog
AI Tracking
Implementation Front-end embedded hardware recognition and tracking Tracking Mode Manual tracking, automatic tracking, radar linkage supported
Reconocimiento Supports classification of people, vehicles, vessels, UAVs and other targets Dataset Requirement Customer assistance required for dataset provision
Servo Pan-Tilt
Estructura Side-mounted, coaxial Horizontal Range N × 360° continuous rotation, mechanical lock after power-off
Pitch Range -30° ~ +60°, with software limit, programmable Velocidad de Rotación Horizontal 0.01° ~ 100°/s, Pitch 0.01° ~ 70°/s
Positioning Speed Horizontal ≥120°/s, Pitch ≥100°/s Acceleration Horizontal 100°/s², Pitch 100°/s²
Interface & Power
Interfaz de red 1 × 100M / 1000M adaptive Ethernet port Fuente de alimentación AC220V ±20%, 50Hz
System Power Consumption ≤1500 W Peso total ≤150 kg
RGS2000 Platform
Integrated Control & Display Centralized control and display of radar, electro-optical, detection and interference systems Situation Display Dynamic display of UAV target points, spectrum direction finding and track information; spectrum-radar data fusion display
Information Recording Supports radar, spectrum target tracks and video recording and playback Auxiliary Tools Supports distance, area and angle measurement; static calibration azimuth calculation; radar-EO assisted calibration
Electronic Map Supports electronic maps and device coordinate locations; online and offline 2D maps Multi-Screen Display Supports split-screen display of video preview, electronic map, video monitoring, video playback and information management
Unattended Operation Supports track data fusion, automatic radar-EO linkage and unattended system operation

 

Efectos de la aplicación

  • MR-AUS70-RD05-RF05 Counter-UAV System3

Productos relacionados

Póngase en contacto con nosotros

Póngase en contacto con nosotros y le responderemos lo antes posible.




    Solicitar presupuesto

      Le responderemos en un plazo de 24 horas. Si para el caso urgente, por favor agregue WhatsApp/WeChat: +86 15954290051,. O llame directamente al +86 15964215221.

      *Respetamos su confidencialidad y toda la información está protegida.

      Sólo utilizaremos sus datos para responder a su consulta y nunca le enviaremos correos electrónicos o mensajes promocionales no solicitados.