Specification for MR-AUS20-RD02SE-RF03 Counter-UAV System

Product Description:

The MR-AUS20-RD02SE-RF03 Counter-UAV System integrates spectrum detection, protocol analysis, radar detection, electro-optical tracking, directional interference response, and a low-altitude target prevention, control and identification platform. The system uses spectrum detection, protocol analysis and radar detection for target verification, then guides the electro-optical system for detection, tracking and identification. After the target type is confirmed, the system can link the radio interference subsystem to interrupt UAV signals and support authorized low-altitude UAV management.

Get Free Quote

Product Introduction

The MR-AUS20-RD02SE-RF03 is a lightweight side-mounted Counter-UAV system designed for low-altitude security protection.

It combines spectrum detection, drone ID / remote ID protocol analysis, Ku-band radar detection, visible-light tracking, infrared thermal imaging, AI target recognition, directional interference response, and RGS2000 platform management.

This configuration is suitable for projects requiring compact structure, flexible deployment, coordinated target verification, optical tracking, and centralized platform operation.

Application scenarios

Airport Low-Altitude Security
Conference Center Security
Conference Center Securit
Restricted Facility Protection

Product Features and Technical Specifications

Highly Integrated System Architecture
The system integrates multiple functional modules while supporting both independent operation and coordinated linkage.

Spectrum Detection and Protocol Analysis
Supports UAV signal detection and protocol analysis, including drone ID and remote ID detection and analysis.

Radar Detection Capability
The radar subsystem adopts digital beam forming technology and supports target detection, tracking and track output.

Electro-Optical Tracking
The electro-optical subsystem combines visible-light imaging, infrared thermal imaging, AI recognition and servo pan-tilt tracking.

Directional Interference Response
The servo system drives directional interference response to improve response distance and speed.

Modular Structure
Subsystems can be independently disassembled, installed and flexibly configured according to project requirements.

Platform-Based Management
The RGS2000 platform supports centralized control, data fusion display, recording and playback, electronic maps, multi-screen display and unattended operation.

Technical Parameters

Parameter	Specification	Parameter	Specification
Model & Working Range
Model Name	MR-AUS20-RD02SE-RF03 Counter-UAV System	Typical Target	DJI Phantom 4
Spectrum Detection Range	≥3 km	Radar Detection Range	≥1.5 km
Visible-Light Tracking Range	≥2 km	Thermal Imaging Tracking Range	≥1 km
Interference Range	≥1.5 km
Spectrum Detection
Monitoring & Identification Frequency Range	300 MHz ~ 6000 MHz	Target Protocol	Supports drone ID and remote ID detection and analysis
Simultaneous Detection Capacity	≥30 UAVs
Radar Detection
Radar Band	Ku-band	Refresh Rate	2 s
Target Capacity	≥200 tracks	Close-Range Blind Zone	≤100 m
Azimuth Coverage	0° ~ 360°	Elevation Coverage	0° ~ 40°
Detection Altitude	≥500 m	Accuracy RMS	Azimuth ≤0.5°, Elevation ≤0.5°, Range ≤10 m
Directional Interference Response
Interference Bands	915 MHz / 1.2 GHz / 1.5 GHz / 2.4 GHz / 5.2 GHz / 5.8 GHz	Power Amplifier	≥50 W for 2.4 GHz and 5.8 GHz; ≥30 W for other bands
Maximum Simultaneous Interference Channels	≥6 channels	Interference Mode	Directional interference
Power	≤800 W
Infrared Thermal Imaging
Detector	Uncooled VOx infrared focal plane array	Resolution	640 × 512
Lens	25 ~ 100 mm, 4× continuous optical zoom	Lens Control	Motorized zoom, manual / automatic focus
HD Visible-Light Camera
Sensor	Starlight CMOS, ICR day/night switching	Resolution	1920 × 1080
Focal Length	25 ~ 500 mm HD motorized zoom lens	Defog	Supports optical / electronic dual defog
AI Tracking
Implementation	Front-end embedded hardware recognition and tracking	Tracking Mode	Manual tracking, automatic tracking, radar linkage supported
Recognition	Supports classification of people, vehicles, vessels, UAVs and other targets	Dataset Requirement	Customer assistance required for dataset provision
Servo Pan-Tilt
Structure	Side-mounted, coaxial	Horizontal Range	N × 360° continuous rotation, mechanical lock after power-off
Pitch Range	-30° ~ +60°, with software limit, programmable	Rotation Speed	Horizontal 0.01° ~ 100°/s, Pitch 0.01° ~ 70°/s
Positioning Speed	Horizontal ≥120°/s, Pitch ≥100°/s	Acceleration	Horizontal 100°/s², Pitch 100°/s²
Interface & Power
Network Interface	1 × 100M / 1000M adaptive Ethernet port	Power Supply	AC220V ±20%, 50Hz
System Power Consumption	≤1500 W	Total Weight	≤150 kg
RGS2000 Platform
Integrated Control & Display	Centralized control and display of radar, electro-optical, detection and interference systems	Situation Display	Dynamic display of UAV target points, spectrum direction finding and track information; spectrum-radar data fusion display
Information Recording	Supports radar, spectrum target tracks and video recording and playback	Auxiliary Tools	Supports distance, area and angle measurement; static calibration azimuth calculation; radar-EO assisted calibration
Electronic Map	Supports electronic maps and device coordinate locations; online and offline 2D maps	Multi-Screen Display	Supports split-screen display of video preview, electronic map, video monitoring, video playback and information management
Unattended Operation	Supports track data fusion, automatic radar-EO linkage and unattended system operation