Angebot einholen

10kg 1-Achsen-Automatik-Gimbal mit einfacher Neigung

Startseite > Produkte > 10kg 1-Achsen-Automatik-Gimbal mit einfacher Neigung
[10kg] 1-Axis Automatic Single-Tilt Gimbal
10kg 1-Achsen-Automatik-Gimbal mit einfacher Neigung
[10kg] 1-Axis Automatic Single-Tilt Gimbal
10kg 1-Achsen-Automatik-Gimbal mit einfacher Neigung
Einachsige Schwenkeinheit

10kg 1-Achsen-Automatik-Gimbal mit einfacher Neigung

Beschreibung des Produkts:

The YZ-BY010W-F is a 10kg 1-axis automatic single-tilt gimbal designed for stable tilt movement and reliable payload support. It features a positioning accuracy of ±0.1°, a tilt speed range of 0.01°/s to 10°/s, and a tilt angle range of -60° to +20°. With a worm gear drive structure, IP66 protection, and support for fixed, vehicle-mounted, and suspended installation, this gimbal is suitable for a wide range of monitoring, deterrence, and security applications.

Kostenloses Angebot erhalten

Produkt-Einführung

The standard model YZ-BY010W-F supports fixed installation and can also be configured for vehicle-mounted, suspended, and marine use. With a maximum payload of 10kg, a tilt angle range of -60° to +20°, and a tilt speed range of 0.01°/s to 10°/s, it is designed for stable operation and accurate tilt control. The gimbal adopts a worm gear drive structure and offers self-locking performance, compact dimensions, and reliable operation in various installation environments. Different communication protocols, interfaces, power supply options, and output line configurations can also be customized according to project requirements.

 

Anwendungsszenarien

  • Überwachung von Autobahnen

    Überwachung von Autobahnen

  • Akustische Abschreckungssysteme

    Akustische Abschreckungssysteme

  • Überwachung der Grenze

  • Building Surveillance

    Perimeter Intrusion Detection

Produktmerkmale und technische Spezifikationen

Benutzerdefinierte Farben: Army Green, Black, White, or other custom colors

Extended Tilt Range: Customizable within -90° to +90°

Higher Tilt Speed: Optional 15°/s to 30°/s

More Preset Positions: Up to 1000 presets

Kommunikationsprotokolle: PELCO-P, ModBus-RTU, or customized protocols

Kommunikationsschnittstellen: RS485, RS232, or Network Port

Power Supply: DC48V optional

Closed-loop System: Absolute encoder or incremental encoder version

Auxiliary Switches: 1–2 dry contact channels optional

Special Environment Adaptation: Vehicle-mounted, suspended, marine applications

Customized Output Lines: USB3.0, Gigabit Ethernet, RF, optical fiber, and more

Technische Parameter

Artikel Standard Specification Optional Configuration
Modell YZ-BY010W-F —
Farbe Ice Gray Army Green, Black, White, Customizable
Rotationswinkel Tilt: -60° to +20° limited rotation Tilt can be customized within -90° to +90°. The larger the angle range, the lower the payload capacity.
Rotationsgeschwindigkeit Tilt: 0.01°/s to 10°/s High-speed tilt: 15°/s to 30°/s optional. The higher the speed, the lower the payload capacity.
Voreingestellte Positionen 200 1000
Positionierungsgenauigkeit ±0.1° —
Power-On Self-Test Supported No self-test (memory battery version / absolute encoder version)
Angle Feedback Query feedback / real-time feedback Note: RS485 interface does not support real-time feedback
Hilfsschalter None 1–2 channels, dry contact, normally open (commonly used for satellite TV, signal transmission, and control linkage projects)
Auto Cruise 2 routes, 40 cruise points per route —
Auto Return Automatic return can be set from 1 to 60 minutes —
Auto Scan 1 route —
Salt Spray Resistance None Under pH 6.5–7.2, after 48 hours of continuous spray testing, no obvious surface change
Communication Protocol PELCO-D PELCO-P, ModBus-RTU, customized protocol
Baud Rate 9600bps 2400 / 4800 / 115200bps
Communication Interface RS422 RS485 / RS232 / Network Port
Power Supply Voltage DC24V DC48V
Power Consumption (Operating) ≤35W May vary depending on configuration
Power Consumption (Standby) ≤2W May vary depending on configuration
Working Temperature -25°C to +65°C, non-condensing -40°C to +65°C, non-condensing
Storage Temperature -40°C to +65°C —
Payload 10kg Note: When the center of gravity is 40mm directly above the top plate, increasing speed, increasing tilt angle, or raising the center of gravity will reduce the payload accordingly.
Dimensions 180 × 130 × 197 mm (L × W × H) Custom appearance available
Net Weight 5kg May vary depending on configuration
Mounting Method Top Mount Inverted Mount
Self-Locking Performance Self-locking —
Protection Level IP66 —
Installation Environment Fixed installation Vehicle-mounted / Suspended / Marine use
System Type Open-loop system (without encoder) Closed-loop system (absolute encoder / incremental encoder)
Upper Output Lines 1 standard load signal cable (4-core) + 1 DC24V output power cable (2A) Standard power / standard signal / high-power supply / USB3.0 / Gigabit Ethernet / RF (0–3G / 3G–18G) / optical fiber / others
Lower Output Lines 1 standard load signal cable (4-core) + 1 DC24V input power cable (system power supply) + 1 RS422 line (gimbal communication) Standard power / standard signal / high-power supply / USB3.0 / Gigabit Ethernet / RF (0–3G / 3G–18G) / optical fiber / others

 

Dimensions Drawing

10kg 1-Axis Automatic Single-Tilt Gimbal2

Auswirkungen der Anwendung

Verwandte Produkte

Bitte kontaktieren Sie uns

Bitte kontaktieren Sie uns und wir werden uns so schnell wie möglich mit Ihnen in Verbindung setzen.




    Angebot einholen

      Wir werden Ihnen innerhalb von 24 Stunden antworten. Wenn für dringenden Fall, fügen Sie bitte WhatsApp/WeChat: +86 15964215221,. Oder rufen Sie direkt +86 15964215221 an.

      *Wir respektieren Ihre Vertraulichkeit und alle Informationen sind geschützt.

      Wir verwenden Ihre Daten nur zur Beantwortung Ihrer Anfrage und senden Ihnen niemals unaufgefordert E-Mails oder Werbenachrichten.